MVR Evaporators

MKS having core experience in designing and manufacturing of (MVR) Mechanical Vapor Recompression evaporator.

As energy costs increases, it increase the operation cost. Indeed use of Mechanical Vapor Recompression (MVR) evaporators has also increase . The energy savings in terms of steam by using MVR technology is Excellent and much efficient.

MVR evaporators are designed to operate with very low specific energy consumption while producing clean condensate water and  tminimized fresh water consumption by treating  waste (Effluent) water for reuse in the industries process.

MKS MVR evaporators referred to as a Vapor Compression Evaporator removes water from industrial effluent  with minimum energy consumption and maximum condensate water out put to plant of high  quality.

The evaporators have lamella heating surfaces.  Inherently non-foaming, these evaporators are ideally suited for the low dry solids applications of MVR evaporation with capacities from 10 to 200 t/h in a single unit.

MVR evaporators operate on a “heat pump” principle. The evaporated water vapor is re-compressed with a simple, low-speed centrifugal fan or compressor, which increases the saturation temperature of the vapor. After the fan, vapor can be used as heating steam in the same unit. The recompressed vapor condenses and releases its latent heat through the heat transfer surface for further evaporation of the  effluent or Liquor.


  • Low energy consumption
  • Very Less steam consumption
  • No cooling water required
  • Excellent condensate Quality .
  • Easy and Smooth Operation
  • Very less operation cost of evaporation.
  • Low TDS Water Recovery can use in process.
  • Zero Liquid Discharge(ZLD) Achievable

Applicable Industries

Textile, Dairy, Sugar, Food & Beverage, Starch, Chemicals, Pharmaceuticals, Distillery, Pulp and Paper etc.

Any Effluent to Achieve ZLD (Zero Liquid Discharge)